Flowcon Launch Mini Valve Bypass Unit - Commissioning made even easier

27 Jan 2013

The new FlowCon Mini By-Pass will, with a center measurement of only 40mm, fit directly on small FCUs without further adaptation.

The unit is 20mm male threaded suitable for DN15 EuroCone connections and a variety of union end connections is available. Additionally, the unit can be ordered with extended handles if needed in the specific application.

Finally, the new FlowCon Mini By-Pass can be supplied with one or two side options upon request , e.g. for drain and air vent.

Technical data:

• 3 way mini By-Pass unit.

• Forged brass housing.

• Nickel plated brass ball valves.

• Can be fitted with optional FlowCon strainer and drain possibility on supply side.

• Can be fitted with optional FlowCon inserts/cartridges on return side
  (Green, EVS, Composite, E-JUST or Stainless Steel).

• Can be fitted with a range of optional FlowCon actuators on return side
   (depending on insert/cartridge selection and valve body).

• ISO Sizes: 4 x 20mm (3/4”) male fixed end for DN15 EuroCone.
   Multiple union end connections available.

All together, the FlowCon Mini By-Pass unit is a compact and smart solution for both consultants, contractors and maintenance people. The FlowCon all-in-one solution is the easiest solution for automatic balancing and temperature control of HVAC applications

Contact our office for further information on 01 885 3792 or by email info@atpireland.com
Further information can be downloaded from the Flowcon websitewww.flowcon.com

Flowcon Mini By-Pass Unit

Flowcon Launch Mini Valve Bypass Unit - Commissioning made even easier

Get in touch